The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! The combination of the new Universal alu mast 75 cm and a fuselage of 76 cm create the perfect balance and the foundation of this hydrofoil designed to work at lower speeds. The Universal SWK 1600 front wing is the engine of the whole system. Built with an extra thick profile, it will create the right lift to start foiling at low board speed! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cms wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible! And with the optional of the Conversion Kit, you can perfectly Windfoil too!
Recommended for novice riders, the ideal hydrofoil for schools.
1582cm2 Universal hybrid carbon front wing
New 30% stiffer and lighter aluminium mast with integrated plate
New redesigned 76 cm light Universal fuselage
Solid connection using 8 mm diameter Torx screws and helicoil threads for mast, fuselage and wings. A reliable, strong and quick to assemble/disassemble connection
New wider Hi density plastic mast foot connector/adaptor for improved lateral stiffness. No oxidation between mast and fuselage
Each component comes with an EVA Cover with Velcro to fasten it inside the bag (foil set bag supplied separately).
|MODEL||MAST||FUSELAGE||FRONT WING||REAR WING||ART CODE|
|UNIVERSAL SWK ALU 1600 FOIL SET Y26||75 cm||76 cm||Wing span 82 cms / wing area 1582 cm2||Wing span 52 cms / wing area 373 cm2||26USWKF1600S|
- UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
- UNIVERSAL FRONT WING 82/1582 Y26 with EVA COVER
- UNIVERSAL REAR WING 52/373 Y26 with EVA COVER
- UNIVERSAL FUSELAGE 76 with WITH EVA COVER Y26
- M8 TORX SCREWS & KEY SET
FOIL TECH SPECS
The new wider profile and stiffer Universal ALU mast with integrated plate is the top combination for speed potential and superior control. The new aluminum plate has been optimized in dimension and integrated into the alu mast using new 8 mm diameter screws to obtain a more solid connection. This mast is 30% lighter and stiffer both in flex and torsion, compared to his predecessor. A true innovative foil component that allows you to concentrate on your riding without thinking about losing control. A must for an improved and precise foil ride.
FRONT AND REAR WINGS LAYUP
Universal hybrid carbon front wing is designed to start flying at lower speeds. Due to its increased thickness you get the right lift to take off easily and the stability you need to learn your first jibes. The Universal hybrid carbon rear wing with negative dihedral (anhedral) is designed to avoid surface turbulences during turns. It also supports you with pumping the board with your feet.
REMOVABLE PLATE CONNECTOR / WING CONNECTION
The new Universal fuselage has an extra wide head area to carry and support super wide wings (up to 120 cms wingspan and 2500 sqcms) and entirely redesigned for maximum lightweight. Its new wider middle and front section design can sustain higher flex pressure and torsion pressure from the input of the mast and front wing and offers an improved level of stiffness. Lighter and stiffer!
MAST FUSELAGE CONNECTION
New 8mm diameter Torx screws for mast, fuselage and wings has improved connectivity to improve in stiffness and for more user friendly assembly / disassembly. No more damaged screw heads and threads!
MAST FUSELAGE CONNECTION
The new mast foot adaptor design is now wider for improved lateral stiffness, securing a “one welded piece“ feeling between fuselage and mast.
Hi density Plastic connector/adaptors to avoid oxidation between mast and fuselage connection. 2 x 8mm diameter Torx screws for a reliable, strong and quick connection.
Thanks to the use of these mast foot adaptors you can switch your foil from an Alu to a Carbon Mast. No need to change your fuselage.
FOIL SET BAG (sold separately)
Our new foil set bag 120 can fit any set and parts of our complete Y26 Hydrofoil collection.
There are velcro attachments that will fit and lock every part inside its padded cover so every component of any size will be secure and not move inside the bag.